Take two black pipe cleaners, and cut them in half.
Line up the four pipe cleaner pieces beside each other and center them as best you can. It’s okay if the lengths aren’t perfectly even – you can bend them afterwards to make up for it.
Place the lolly pop on top of the pipe cleaners, about 1/3 of the way in from one side.
Step 3: Bend the pipe cleaners
Wrap the long side around the lolly pop and loop it around.
You’ll end up with something that looks like this. I personally preferred the side that’s showing here to be the side that ends up with the eyes, but take a look for yourself, and decide which side you think looks better as the face.
This is what the other side looks like:
Bend the legs into little L’s. They don’t have to be perfect, just do your best to shape them into little legs. Bend the pipe cleaners slightly sideways too so you have equal spacing between all the legs.
Step 4: Attach the googly eyes
Put a small dab of hot glue on the back side of the googly eyes.(You can also use glue tape to attach the eyes.)
Place the eyes towards the front of the pipe cleaner spider’s body.You want the eyes about 1/3 of the way over the body. Not the middle. Not the edge. Just slightly back: