These cute heart rings made with pipe cleaners are SO EASY to make and they’re perfect for Valentine’s Day… or any time! All you need is one pipe cleaner (or two pipe cleaners if you want to make a double heart ring). You can make a pipe cleaner heart ring in about 5 minutes!
Valentines Day Heart Rings
These homemade finger rings made from pipe cleaners are so easy to make! You know I love simple crafts that barely take any supplies. Grab a bag of pipe cleaners at the dollar store, and you’re ready to go!
This pipe cleaner valentine craft is adorable and it’s so much fun to make with kids. This craft is as low mess as they come!
Video Tutorial: Pipe Cleaner Heart Rings
Watch the rest of the videos in our pipe cleaner rings series here. You can make them all in just a few minutes:
How to Make a Single Heart Ring
Here’s a list of what you’ll need (including an affiliate link to pipe cleaners on Amazon):
- 1 pipe cleaner (12 inches long)
Take the pipe cleaner and place it behind one of your fingers (the one you plan to wear the ring on), leaving about 1.5 inches to the end of the pipe cleaner.
Wrap the pipe cleaner around your finger. Then twist the end a few times to hold it in place.
You should have a loop on one end of the pipe cleaner.
Sometimes the loop gets smaller when you twist it. So double check that the loop actually fits your finger before you move on. Adjust the size of the loop if needed.
Pinch the end of the pipe cleaner and roll it onto itself to make a spiral.
Keep rolling the pipe cleaner into a tight spiral until there’s about 1/4 inch of space between the ring loop and the spiral.
Bend the ring loop backwards so it’s at a 90 degree angle to the spiral. (So if you put the ring on your finger now, you’d have a spiral on the front of the ring).
Bend the pipe cleaner to adjust the ring position. Try as best as you can to get the ring loop so it’s behind the middle of the spiral.
Now you can shape your heart! Pinch the bottom of the spiral to make the bottom V shape of the heart.
Then press your finger nail into the middle of the top of the spiral to make a bend for the top middle groove of the heart.
Pinch and bend the sides of the heart until you’re happy with the shape.
What if My Heart Doesn’t Stay Together?
Don’t worry, I couldn’t get all of my hearts to stay tightly together either.
If your heart shape tries to unwind when you let go of it, add a small dab of hot glue from the glue gun between the pipe cleaners at the very bottom point of the heart. The little dab of glue really helps the heart keep its shape.
I only had to add glue to some of my heart rings, but not all of them. This particular red heart ring stayed together all on it’s own, without glue.
It really depends how tight you’re able to spiral the pipe cleaner.
How to Make a Double Heart Ring
Here’s a list of what you’ll need (including an affiliate link to pipe cleaners on Amazon):
- 2 pipe cleaners (12 inches long)
I recommend using 2 different pipe cleaner colours, but it’s completely up to you!
Take your 2 pipe cleaners and line up the two ends.
Starting at one end, twist together the two pipe cleaners so that about a 2 inch length of pipe cleaner is twisted.
We’re not going to twist along the whole length, just the part that’s going to go around your finger.
Just like in the single heart ring tutorial above, you’ll need to wrap the twisted end of the pipe cleaner around your finger to make a loop for the ring. (See above for the photo and video for this step).
You should have a ring at one end (double check that it fits your finger before you move on), with two separate pipe cleaners coming out of it, just like in the photo below.
Pinch the end of one of the pipe cleaners and roll it into a tight spiral.
Keep rolling it into a spiral until there’s about 1/4 inch of space left between the ring and the spiral.
Repeat this step for the second pipe cleaner so you have a ring with two spirals on it.
Bend the pipe cleaners to adjust the ring position. Try as best as you can to get the ring loop so it’s behind the middle of the two spirals.
Bend the spirals so that one spiral is in front of the other spiral, like in the photo below.
Just like in the tutorial above, pinch the bottoms of the spirals into a point for the bottom of the hearts. Then press your fingernail into the top of the spirals to make the top of the heart shape.
Adjust the hearts until you’re happy with the shapes.
I added a little dab of hot glue between the pipe cleaners at the bottom points of both of the hearts on this double ring. Unlike the first ring I made, this one didn’t seem to want to keep its shape!
The glue may not be necessary, but it definitely helps keep things in place so your hearts don’t become loose.
You can make single heart rings, or double heart rings in all different colours.
I chose reds and pinks for ours. I love how festive they are for Valentine’s day!
How to Make Cute Heart Rings from Pipe Cleaners
These cute heart rings are a fun project for Valentine’s Day or any time of year really! Wouldn’t they make a fun little friendship ring for the kids to give to to their BFF’s?
Pipe Cleaner Heart Rings
Instructions
- If you're making a single ring move to step 2.If you're making a double ring, take 2 pipe cleaners and line up the ends. Then twist about a 2 inch length of the pipe cleaners together.
- Take the pipe cleaner (or the twisted pipe cleaners if you're making a double ring) and place it behind the finger you plan to wear the ring on, leaving about 1.5 inches to the end of the pipe cleaner.
- Wrap the pipe cleaner(s) around your finger then twist them together a couple times. There should be a loop that fits over your finger at the end of the pipe cleaner(s).
- Pinch the loose end of the pipe cleaner and roll it onto itself to make a tight spiral, leaving about 1/4 inch of space between the ring loop and the spiral. (If you're making a double ring, you'll be doing this twice to make 2 tight spirals.)
- Bend the ring loop back so it comes out at a 90 degree angle behind the middle of the spiral(s).
- To shape your heart, pinch the bottom of the spiral to make the bottom V shape. Then press your finger nail into the middle of the top of the spiral to make the top middle groove of the heart. (If you're making a double ring, repeat this step to shape the second heart).
- Pinch and bend the sides of the heart(s) until you're happy with the shape.
Notes
These pipe cleaner heart rings are SO CUTE and they’re so easy to make! With 5 minutes and just one or two pipe cleaners you can make either a single heart or double heart ring. Make them for yourself or give your friends a homemade ring instead of a friendship bracelet! This is such a great Valentine’s Day craft and a super fun craft for kids.
Here are even more cute pipe cleaner rings for you to try!
Our book Low-Mess Crafts for Kids is loaded with 72 fun and simple craft ideas for kids! The projects are fun, easy and most importantly low-mess, so the clean up is simple!
Where to buy:
You can purchase Low-Mess Crafts for Kids from Amazon, or wherever books are sold:
Amazon |  Barnes and Noble |  Books- A- Million |  Indiebound |  Indigo |  Amazon Canada
I’m impressed, I have to admit. Rarely do I come across a blog that is both equally educative and amusing, and let me tell you, you have hit the nail on the head on this topic. Thanks.