Open each of the pipe cleaners slightly so that they form "V"s. Separate them and set them on the back of a leaf with the tips of the "V"s in the center.The pipe cleaners should slightly overlap, forming a diamond shape.
Add two dots of hot glue where the pipe cleaners will go.
Place the point of one "V" shape in the bottom dot of glue so the ends point towards the top of the leaf. Place the point of the other "V" shape in the top dot of glue so the ends point towards the bottom. Hold them until they stay in place.
Step 3: Bend the legs and arms
Turn the leaf over and fold the bottom pipe cleaners into the leaf person's feet.To do this, bend the end of the pipe cleaner up about 1 inch, and then bend it so the foot is pointing outwards. Make a slight bend halfway down the pipe cleaner to create the knee.Repeat on the other side.
Create arms from the top pipe cleaners. Bend them down and make an elbow curve at about the half-way mark.Then fold the ends of the pipe cleaners in about 3/4 inch to create hands. Don't forget to make a slight bend at the "wrist".
Step 4: Add googly eyes and draw a mouth
Add hot glue to the back of a googly eye.
Place the eye near the top of the leaf. Repeat with a second eye.
Use a black permanent marker to draw a mouth on your leaf person.
Your leaf person is complete!Now have fun making more leaf people with different colours and shapes of leaves.