Gather 4 pipe cleaners in the same colour.We used black pipe cleaners for this spider, and brown for some of our others, but you could also use purple, orange, green, or whatever colour you'd like!
Bend the pipe cleaners in half in a 'V' shape. You can hold them together and do this, or bend each one individually.
Grab one of the pipe cleaners and put the center point in-between the tips of the pine cone, close to the end.Pull the edges of the pipe cleaner down, pushing the center down as far as it will go. Make sure the point of the 'V' stays in the middle of the pinecone.
Add a second pipe cleaner in the same way, to the "row" above the first pipe cleaner.
Repeat for the next two pipe cleaners. You've just added the spider's legs!
Step 3: Glue and adjust the legs
Add a generous amount of hot glue on top of each pipe cleaner, in-between the pinecone tips.Hold the pipe cleaner in place while the glue hardens and allow the glue to drip down into the crevices of the pinecone.
Once the glue is dry, flip the pinecone over so the glued part is at the bottom.Bend the pipe cleaners down so that the top part of the leg is straight out from the body, and the rest of the leg goes down in an upside down "L" shape.
Trim the ends of the legs, if necessary, to make them the same length.
Step 4: Add googly eyes to the pine cone spider
Add hot glue to the back of a googly eye.
Place the first googly eye onto the large part of the pinecone.
Repeat, adding as many different eyes as you'd like. We added 7 googly eyes to this spider in 2 different sizes.